Steam Condenser Lid

What does it do?
The steam condensing lid captures the steam created during boiling and converts it back into a liquid using a misting nozzle. This prevents steam from conde...
Tue, 9 Jun, 2020 at 1:42 PM
What are the TC ports for?
The left 1.5” TC is for a CIP ball and the 4” is for hop additions. 
Tue, 9 Jun, 2020 at 1:43 PM
Will this plug into the Solo panel?
Yes, the panel will have a dedicated plug and switch for the SCL (steam condensing lid). 
Tue, 9 Jun, 2020 at 1:43 PM
What is the water usage of the SCL?
15-25GPH depending on the size purchased. The water exiting the SCL will be quite hot and we recommend capturing this to use as cleaning water.    15...
Tue, 9 Jun, 2020 at 1:44 PM
What about DMS?
We have done third party laboratory testing at the University of Wisconsin-Milwaukee to validate this design. We took multiple samples throughout the boil a...
Tue, 9 Jun, 2020 at 1:44 PM
What about boil off?
The lid reduces the boil off rate by at least 50% which means more finished product for the brewer!   
Tue, 9 Jun, 2020 at 1:45 PM
Will this fit other company’s kettles?
Yes!  Specs to be added......
Tue, 9 Jun, 2020 at 1:47 PM
Does it have a seal, latch, gasket, etc?
No. The fit is quite tight on the kettle and a vacuum is created when the steam condenses to a liquid in the condensing pipe. All this prevents any steam fr...
Tue, 9 Jun, 2020 at 1:47 PM
Can it be used to distil?
We have not tested the lids outside of the beer brewing application  
Tue, 9 Jun, 2020 at 1:47 PM
Can I use my home water supply for the water feed?
We don’t recommend this as your home water supply is usually 30psi+. The submersible pump we supply is 6psi and is what our system was designed to work with...
Tue, 9 Jun, 2020 at 1:48 PM