We are excited to offer both a single batch panel and double batch panel for the Spike Nano System. The double batch panel allows the brewer to heat both the HLT and BK simultaneously. This can come in handy when brewing two batches in a row to save time, or to heat cleaning water in HLT while boiling. 

  • Both panel options are available in both 208V and 240V. 
  • Both panel options available in both single phase (standard configuration) and three phase. 
  • Please specify voltage of your building so correct elements can be sent.
  • International Version Available as well

Single Batch Panel

  • 4 wire; hot, hot, neutral, ground
  • Full load amperage @208V = 77.5A
  • Full Load Amperage @240v = 68A
  • Single direct feed required (from panel to breaker box, no outlet)

Double Batch Panel

  • 4 wire; hot, hot, neutral, ground
  • Full load amperage @208V = 135A
  • Full Load Amperage @240v = 118A
  • Dual direct feed required (from panel to breaker box, no outlet)

*All work should be done by a qualified electrician in accordance with local and national electrical codes

Cord Lengths

  • Electrical Panel to Junction Box - Length determined by your electrician, length may vary
  • Electrical Panel to Boil Kettle - 2 x 8 Foot Cords
  • Electrical Panel to Hot Liquor Tank - 2 x 15 Foot Cords

Installation Cost Estimator

 

Residential

Commercial

Material Cost

$12/ft

$18/ft

Labor Cost

$9/ft

$12/ft

*For double batch panel installs double both material cost and labor cost

**Calculated at $85/hr. labor rate and 50 ft install

**These are budgetary estimates only. Actual install costs can vary.